Knowledge Of Wallpaper moisture prevention

2019-09-27

Although the wallpaper is beautiful, it also has its own weaknesses, such as easy breakage and moisture, so pay special attention to moisture treatment during wallpaper construction and use. Before posting the wallpaper, you need to handle the base surface first. You can use the double fly powder and the cooked rubber powder to batch and level. After it has dried out, brush it on the varnish one or two times and then post it. In order to prevent the wallpaper from falling off, it is also possible to apply a layer of moisture-proof paint, which should be evenly applied, not too thick, to ensure that the moisture content of the base layer of the wall should be less than 8/100.

 
If it is decorated with plastic wallpaper, because the plastic wallpaper will swell when it meets water, it is necessary to moisturize the paper to fully expand the plastic wallpaper. Wallpaper, wall cloth, etc. of glass fiber substrate. Composite paper walls and textile wallpapers should not be sultry.
 
The maturity of the process has led to the emergence of waterproof wallpaper, which is effective against moisture, but its moisture resistance is certainly not comparable to tiles, so it is best to use it in the dry area of the bathroom in the wet and dry section. However, if you like to replace the wall frequently, it is ok to use the waterproof wallpaper in the wet area. Basically, it is no problem to replace it once or two. In rooms where the sun is hard to reach, such as the north room, the dressing room, the bath room, and some low-dark and dark rooms, use anti-corrosion wallpaper to effectively prevent poison and moisture.